top of page

Photoluminescent Exit Path Strip — 50 mm x 10 m

MNX-SW-B01

Photoluminescent route marking is specified where escape lighting may be delayed, and where smoke reduces the effectiveness of conventional signs. This strip is a passive element: no wiring, no battery, no maintenance schedule beyond cleaning. It is laid along the route rather than at the route's end, so a person following the floor arrives at the exit door even if the wall-mounted signs are obscured.

Key Features

Glow: green afterglow above 0.3 mcd per sq m for 60 minutes
Charge: 15 minutes under 100 lux ambient light
Width: 50 mm, matched to walkway edge marking
Adhesive: high-tack acrylic, bonds to concrete, tile and steel
Wear layer: clear protective film over the glow layer
Format: 10 m roll with printed cutting guide
Surface: matte, slip resistant when dry or wet
Compliance: DIN 67510 class B photoluminescent film

Technical Data

Roll size: 50 mm x 10 m
Thickness: 1.2 mm total
Afterglow: 60 minutes above threshold
Charge time: 15 minutes at 100 lux
Adhesion: above 1.2 N per mm on steel
Service temperature: minus 10 to plus 60 degrees C
Flammability: EN 13501-1 class B-s1
Standard reference: DIN 67510, EN 1838

Material & Specifications

Film: photoluminescent PVC, class B
Adhesive: acrylic, solvent-free
Wear layer: clear PET, 50 micron
Release liner: silicone-coated paper

Applications

Corridor escape route lines
Stair nosings and landing edges
Tunnel walkway demarcation
Plant room and basement routes
Offshore and marine accommodation paths

Product Advantages

No wiring, battery or maintenance schedule
Glow visible after total lighting failure
Strip marks the route, not just the exit
Adhesive bonds to concrete, tile, epoxy and steel
Clear wear layer survives cleaning machines
Cutting guide simplifies stair and corner work

Product Type
Glow route tape
Glow route tape, compact grade
Glow route tape, heavy-duty grade
Model Code
MNX-SW-B01
MNX-SW-B01-S
MNX-SW-B01-H
Overall Size / Format
50 mm x 10 m
25 mm x 10 m
50 mm x 20 m
Substrate / Material
Heavy PVC, traffic grade
Matte vinyl, indoor grade
Heavy PVC + R11 anti-slip / class B glow
Surface / Performance
Heavy PVC, traffic grade
Matte vinyl, indoor grade
Heavy PVC + R11 anti-slip / class B glow
Legend / Symbol Coverage
Continuous route line
Continuous route line (reduced type)
Continuous route line (larger type)
Service Temperature
-10 to +60 C
-5 to +55 C
-15 to +65 C
Mounting / Fixing
Self-adhesive acrylic
Self-adhesive acrylic
Self-adhesive acrylic
Best For
Corridors, stairs, tunnels
Corridors, stairs, tunnels — light duty
Corridors, stairs, tunnels — exposed or high-traffic
bottom of page