Pedestrian Walkway Floor Mark — 100 mm x 10 m
MNX-SW-B07
Segregation only works when the route is continuous and obvious at a distance. This 100 mm tape is specified for yards and large halls where a thin line becomes invisible, and it is laid as a pair of parallel edges rather than a single stripe, so the walkway reads as a corridor with a defined width rather than a decorative line on the floor.
Key Features
Width: 100 mm, legible at ten metres
Base: heavy plasticised PVC
Adhesive: acrylic, formulated for concrete yards
Traffic: survives pallet truck edge clipping
Format: 10 m roll with corner guide
Use: lay as parallel edges to define walkway width
Finish: matte, no glare under floodlight
Colour: safety white or yellow
Technical Data
Roll size: 100 mm x 10 m
Thickness: 0.6 mm
Adhesion: above 1.1 N per mm on concrete
Service temperature: minus 10 to plus 60 degrees C
Elongation: above 120 percent
Traffic rating: pallet trucks and site vehicles at low speed
Flammability: B-s1
Standard reference: ISO 3864-1
Material & Specifications
Base: plasticised PVC film
Adhesive: acrylic, solvent-free
Liner: paper, silicone coated
Colour: pigmented white or yellow
Applications
Yard pedestrian routes
Production hall walkways
Warehouse pick aisles
Site compound routes
Temporary event walkways
Product Advantages
100 mm width stays visible at ten metres
Parallel edges define a corridor, not a line
Survives low-speed vehicle edge contact
Corner guide simplifies turning the route
Matte finish works under floodlights
Combines with arrow marks for a full route
Product Type | Walkway tape | Walkway tape, compact grade | Walkway tape, heavy-duty grade |
Model Code | MNX-SW-B07 | MNX-SW-B07-S | MNX-SW-B07-H |
Overall Size / Format | 100 mm x 10 m | 50 mm x 10 m | 100 mm x 20 m |
Substrate / Material | PVC 0.6 mm, concrete grade | PVC 0.5 mm, indoor | PVC 0.7 mm, yard grade |
Surface / Performance | PVC 0.6 mm, concrete grade | PVC 0.5 mm, indoor | PVC 0.7 mm, yard grade |
Legend / Symbol Coverage | Parallel route edges | Parallel route edges (reduced type) | Parallel route edges (larger type) |
Service Temperature | -10 to +60 C | -5 to +50 C | -15 to +65 C |
Mounting / Fixing | Self-adhesive, concrete grade | Self-adhesive, concrete grade | Self-adhesive, concrete grade |
Best For | Yards and production halls | Yards and production halls — light duty | Yards and production halls — exposed or high-traffic |