Anti-Slip Floor Label — 200 x 300 mm
MNX-SW-B02
Slip incidents concentrate at transitions rather than on uniform surfaces, and the transition is usually unmarked. This label is designed for that specific position, with an aggregate surface that adds grip instead of removing it, and a legend that states the condition rather than a generic warning. It suits indoor industrial floors where a rigid sign would be a trip hazard and paint would wear away within weeks.
Key Features
Surface: R11 aggregate, slip resistant when wet
Adhesive: pressure acrylic for epoxy, concrete and steel
Print: protected beneath the aggregate layer
Legend: condition-specific wording, two lines
Edge: radius cut to resist lifting at corners
Format: individual label, 200 x 300 mm
Cleanability: scrubber-drier and mop resistant
Option: arrow version pointing to the safe route
Technical Data
Size: 200 x 300 mm
Thickness: 1.6 mm
Slip rating: R11 to DIN 51130
Adhesion: above 1.0 N per mm on epoxy
Service temperature: minus 5 to plus 60 degrees C
Abrasion: 500 cycles Taber without legend loss
Flammability: B-s1 to EN 13501-1
Standard reference: DIN 51130, EN 13501-1
Material & Specifications
Base: plasticised PVC, 1.4 mm
Aggregate: aluminium oxide grit, R11
Adhesive: acrylic, solvent-free
Wear layer: clear laminate over print
Applications
Ramp and step lips
Wash-down and bottling areas
Greasy production floors
Cold-store ante-rooms
Vehicle workshop bays
Product Advantages
Adds grip instead of creating a slippery patch
Survives scrubber driers and pallet traffic
Cut radius stops corner lifting
Condition-specific legend, not a generic warning
Bonds to epoxy, concrete and steel plate
Usable where a rigid sign would be a trip hazard
Product Type | Floor hazard label | Floor hazard label, compact grade | Floor hazard label, heavy-duty grade |
Model Code | MNX-SW-B02 | MNX-SW-B02-S | MNX-SW-B02-H |
Overall Size / Format | 200 x 300 mm | 150 x 200 mm | 300 x 400 mm |
Substrate / Material | Vinyl + R11 aggregate | Vinyl, R10 | Vinyl + R11, chemical resistant |
Surface / Performance | Vinyl + R11 aggregate | Vinyl, R10 | Vinyl + R11, chemical resistant |
Legend / Symbol Coverage | 1 symbol + 1 condition line | 1 symbol + 1 condition line (reduced type) | 1 symbol + 1 condition line (larger type) |
Service Temperature | -5 to +60 C | -5 to +50 C | -10 to +65 C |
Mounting / Fixing | Pressure adhesive, flat lay | Pressure adhesive, flat lay | Pressure adhesive, flat lay |
Best For | Ramps and wash-down entries | Ramps and wash-down entries — light duty | Ramps and wash-down entries — exposed or high-traffic |